-
Maxell Lead-Free Oxygen Sensors - KE-LF Series
The Maxell Oxygen Sensor KE-LF Series are unique galvanic cell-type oxygen sensors developed by Maxell, Ltd. in Japan.
-
Short Probe Zirconia Oxygen Sensors (Zirconia O2 Sensor) - O2S-T2 / O2S-FR-T2
O2S-FR-T2 Short Probe Zirconia Oxygen Sensor, Long life, non-depleting technology. Can be used in high pressure and temperature environments.
-
Zirconia Oxygen Sensor System - O2S-FR-T2-18BM-C-010V
O2S-FR-T2-18BM-C-010M Zirconia Oxygen Sensor System. 0-10VDC Analogue output. Oxygen range (analogue output): 0.1-25% O2 or 0.1-100% O2.
-
Optomax Digital Series Liquid Level Sensors - LLC200D3SH
LLC200D3SH Optomax Digital Series Liquid Level Switches, -25°C to +80°C, Polysulfone, Housing Type: M12x1, Supply voltage: 4.5V DC to 15.4V DC.
-
Dust Sensor Module for Air Quality Monitor - DSM501A
Dust Sensor Module: DSM501 series detects the level of indoor airborne dust, particles, and pollen, and ideal for use in stand-alone air cleaner or IAQ monitor.
-
PM2.5 Particle Sensor Module - PDSM010
PDSM010 Particle Sensor Module detects approx. 1μm particle such as house dust, pollen, germs, dust mites and cigarette smoke.
-
PM2.5 Particle Sensor Dust sensor Laser sensor Atmospheric particle monitors - OPC-N3
OPC-N3 PM2.5 Particle Sensor measures PM1, PM2.5 and PM10. Onboard temperature and humidity sensor.
-
Nitric Oxide Sensor (NO Sensor) 4-Electrode - NO-B4
NO-B4 Nitric Oxide Sensor NO Sensor 4-Electrode, 32mm diameter package, the best choice for fixed site applications.
-
Hydrogen Sulfide Sensor (H2S Sensor) 4-Electrode - H2S-B4
H2S-B4 Hydrogen Sulfide Sensor H2S Sensor 4-Electrode. Range: 100 ppm H2S limit of performance warranty. Sensitivity: 1450 to 2050 nA/ppm at 2ppm H2S.
-
Oxygen Gas Sensor (O2 Sensor) - O2-M2
O2-M2 Oxygen Gas Sensor (O2 Sensor), 20mm diameter, the industry standard size for portable gas detectors.
-
Carbon Monoxide Sensor (CO Sensor) 4-Electrode - CO-B4
CO-B4 Carbon Monoxide Sensor 4-Electrode. Range:1000 ppm limit of performance warranty. Sensitivity: 420 to 650 nA/ppm at 2ppm CO.
-
Low Power Low Profile Carbon Dioxide Sensor NDIR CO2 Sensor - CozIR-LP3
The CozIR®-LP3 provides the user with extensive flexibility, a choice of UART or I²C control interfaces, digital and analogue CO₂ measurements, and a fail-safe
-
LuminOx Fluorescence Optical Oxygen Sensor (O2 Sensor) - LOX-02
LOX-02 LuminOx Fluorescence Optical Oxygen Sensor (O2 Sensor), Fluorescence–based optical technology,
Oxygen Measuring Range: 0-25% O2. -
accurate reliable humidity measuring sensor - HTW-211
Linear & Calibrated %RH Voltage Output. Rigid & Strong Molding Package Enhanced Inside Protection through Coated Materials
-
UV-B Sensor - GUVB-T11GD-L
UV Sensor GUVB-T11GD-L, Good Visible Blindness, High Responsivity & Low Dark Current. Apply to UV-B Lamp Monitoring Outline and UV-B LED Monitoring.
-
Pre-calibrated Module for LP Gas - LPM2610-D09
The LPM2610 is a pre-calibrated module for LP gas alarms which is precisely calibrated in Figaro’s humidity and temperature controlled facility
-
Pre-calibrated Module for Refrigerant Gases R-32 - FCM2630-J0A
FCM2630-J0A is an embedded type module using the semiconductor gas sensor which is optimized to detect A2L refrigerant gas R-32
-
Pre-calibrated Module for Refrigerant Gases R-32 - FCM2630-C01
FCM2630-C01 is an embedded type module using the semiconductor gas sensor TGS2630 which is optimized to detect A2L refrigerant gas R-32
-
Pre-calibrated NDIR CO2 Module - CDM7162-C00
The CDM7162 CO2 module uses a compact NDIR CO2 sensor, featuring excellent performance characteristics
-
Equipped with TGS6814 Catalytic combustion methane sensor module (CH4) - AG-3-CHx-M6814(D)
The AG-3-CHx-M6814 is an embedded type module equipped with the Figaro’s Catalytic Sensor TGS6814
-
Equipped with CH-A3 Catalytic combustion methane sensor module （CH4） - AG-3-CHx-CHA3(D)
The AG-3-CHx-CHA3(D) is an embedded type module equipped with the Alphasense CH-A3 Catalytic Sensor
-
The semiconductor sensor module CH4 is equipped with the Figaro TGS 2611 E00 - AG-2-CH4-MA2611(D)
The AG-2-CH4-MA2611(D) is an embedded type module equipped with the Figaro’s semiconductor Sensor TGS2611-E00
-
The semiconductor gas sensor module CH4 H2 is equipped with the Figaro TGS2610 - AG-2-H2-M2610(D)
The AG-2-H2-MA2610(D) is an embedded type module equipped with the Figaro’s semiconductor Sensor TGS2610-D00
-
Semiconductor gas sensor detects LP propane with Figaro TGS 2619 - AG-2-CH4-M2619(D)
The AG-2-CH4-M2619(D) is an embedded type module equipped with the Figaro’s semiconductor Sensor TGS2619
-
Semiconductor gas sensor detects LP propane with Figaro TGS 2618 - AG-2-CHX-M2618(D)
The AG-2-CHX-MA2618(D) is an embedded type module equipped with the Figaro’s semiconductor Sensor TGS2618-D
-
Hydrogen peroxide sensor Hydrogen peroxide gas sensor H2O2 - H2O2-B1
Hydrogen peroxide sensor Hydrogen peroxide gas sensor H2O2 H2O2-B1
-
Oxygen Sensor (O2 Sensor) Gas Sensor - O2-W2
Oxygen sensor O2-W2 is mainly used to measure the concentration of oxygen gas in the environment
-
TGS5042 Electrochemical Carbon Monoxide sensor module (CO) 0-1000 ppm - AG-4-CO-M5042(D)
The AG-4-CO-M5042(D) is an embedded type module equipped with the Figaro’s carbon monoxide gas sensor TGS5042
-
Equipped with British CO-AM electrochemical carbon monoxide sensor module - AG-4-CO-MCOAM(D)
The AG-4-CO-MCOAM(D) is an embedded type module equipped with the Alphasense 4 series electrochemical Sensor CO-AM
-
Equipped with CO-BF CO electrochemical carbon monoxide sensor module - AG-4-CO-MCOBF(D)
The AG-4-CO-MCOBF(D) is an embedded type module equipped with the Alphasense 7 series electrochemical Sensor CO-BF
-
Oxygen Gas Sensor (O2 Sensor) - O2-M2
O2-M2 Oxygen Gas Sensor (O2 Sensor), 20mm diameter, the industry standard size for portable gas detectors.
-
LuminOx Fluorescence Optical Oxygen Sensor (O2 Sensor) - LOX-02
LOX-02 LuminOx Fluorescence Optical Oxygen Sensor (O2 Sensor), Fluorescence–based optical technology,
Oxygen Measuring Range: 0-25% O2. -
Low Power High Performance NDIR CO2 Sensor - MinIR/ExplorIR-M
MinIR/ExplorIR-M is an ultra low power (3.5mW), high performance CO2 sensor, ideally suited for battery operation and portable instruments.
-
Dust Sensor Module for Air Quality Monitor - DSM501B
Dust Sensor Module: DSM501 series detects the level of indoor airborne dust, particles, and pollen, and ideal for use in stand-alone air cleaner or IAQ monitor.
-
Nitrogen Dioxide Sensor (NO2 Sensor) 4-Electrode - NO2-B43F
NO2-B43F Nitrogen Dioxide Sensor NO2 Sensor 4-Electrode, 32mm diameter package, the best choice for fixed site applications.
-
Ultra Low Power Carbon Dioxide Sensor NDIR CO2 Sensor - COZIR-W/ExplorIR-W
COZIR-W/ExplorIR-W is an ultra low power (3.5mW), high performance CO2 sensor,ideally suited for battery operation, portable instruments and HVAC.
-
Low Cost HVAC Carbon Dioxide Sensor NDIR CO2 Sensor - MisIR
NDIR CO2 Sensor MisIR is a low power (20mW), high performance CO2 sensor. meet the requirements of the HVAC and Demand Led Ventilation markets
-
Photoionization Gas Sensor (PID Gas Sensor) - PID-AH
PID-AH Photoionization Gas Sensor (PID Sensor) has a linear dynamic range of 1 ppb to 50 ppm (Isobutylene). Photo Ionisation Detector.
-
Trace Oxygen Sensor (PPM) - TO2-2x
TO2-2x PPM Oxygen Sensor. Trace O2 measurement when CO2 > 0.1%. Use when acid gases are present (CO2, HCl, HCN, etc.). Signal Output: 285 - 590 uA.
-
15x15 Carbon Monoxide Sensor 1000 ppm Package 110-109 - 3SP_CO_1000 C
3SP_CO_1000 C 15x15 CO Sensor 1000 ppm Package 110-109. Measurement Range: 0 to 1,000 ppm. Long Life. Low Power. Fast Response (< 15 seconds).
-
XL-MaxSonar-WRL1 High Performance Ultrasonic Rangefinder - MB7066
MB7066 XL-MaxSonar-WRL1 Ranges from 20cm to 1068cm with a 10Hz read rate. Pulse-width, analog voltage, and RS232 serial. Reports range to closest target.
-
LV-MaxSonar-EZ1 High Performance Ultrasonic Rangefinder - MB1010
MB1010 LV-MaxSonar-EZ1 Ultrasonic Rangefinder, Ranges from 6 inches to 254 inches with a 20Hz read rate. Wide detection field. Excellent for people detection.
-
Wireless Ultrasonic Fill-Level Sensor - Clean CAP Plus
Clean CAP Wireless Ultrasonic Fill-Level Sensor Can be attached to any type of bin, container, or tank. enables it to detect both solids and liquids.
-
ToughSonic 30 Ultrasonic Level & Distance Sensor - TSPC-15S Series
TSPC-15S Series ToughSonic 30 Ultrasonic Level & Distance Sensor. Up to 30-ft. (9.1 m) maximum range in IP68 rated, 1-1/2 in. NPT threaded housing.
-
HRXL-MaxSonar-WR Series Ultrasonic Sensor MB7360, MB7363, MB7366, MB7369, MB7380 - MB7383, MB7386, MB7389
HRXL-MaxSonar-WR ultrasonic rangefinder, 1mm resolution, 2.7-5.5VDC operation, a narrow beam pattern, high power output, noise rejection, automatic calibration.
-
UV-B Sensor - GUVB-T11GD-L
UV Sensor GUVB-T11GD-L, Good Visible Blindness, High Responsivity & Low Dark Current. Apply to UV-B Lamp Monitoring Outline and UV-B LED Monitoring.
-
UV-A Sensor - GUVA-S12SD
GUVA-S12SD UV sensor, Good Visible Blindness, High Responsivity & Low Dark Current. Mainly apply to UV Index Monitoring and UV-A Lamp Monitoring.
-
Waterproof UV Sensor for Pantograph Arc Detection - UV-Arc
UV-Arc is a waterproof sensor with a male threaded body (G3/4) to be used on trains to measure intensity and length of pantograph arcs according to EN 50317.
-
SiC UV photodetector - TOCON_ABC1
TOCON_ABC1 Broadband SiC based UV photodetector, 0 - 5 V voltage output, peak wavelength at 280 nm, max. radiation (saturation limit) at peak is 18 nW/cm2.
-
Concentrator Lens SiC UV Photodiode - SG01D-5Lens
SG01D-5Lens UV Photodiode, 0.5 mm2 detector area, TO5 housing. 10µW/cm2 peak radiation results a current of approx 350 nA. Responsivity Range: 221-358nm.
-
Gas Mass Flow Sensor - FS4008
FS4008 can be configured to measure flow up to 50 SLPM. It can be applied for gas flow measurement and/or control equipments.
-
MEMS Mass Flow Sensors - FS4001
FS4001 series mass flow sensors are manufactured using MEMS flow sensor and package technology.
-
MEMS Mass Flow Sensors - FS5001L Series
FS5001 series mass flow sensors are designed for general purpose flow monitoring and control applications. Flow Range from 0-200 sccm up to 0-6000 sccm.
-
MEMS Mass Flow/Clog Sensors - FS7002-B/FS7002-C
FS7002 series mass flow/clog sensors can be used for open air space flow measurement or applied for clog sensing in an open space configuration.
-
FS8000 Series MEMS Mass Flow Sensors - FS8001/FS8003
The FS8000 requires a power supply of 8~24 Vdc, and provides an analog output of 0.5~4.5 Vdc corresponding to the flow rate from 0 to full scale.
-
Capacitive Humidity Sensor - HS1101/HS1101LF
HS1101LF Based on a unique capacitive cell, these relative humidity sensors are designed for high volume, cost sensitive applications
-
Temperature Humidity Sensor Module - HTF3223LF
humidity sensor HTF3223LF is a dedicated humidity and temperature transducer designed for OEM applications where a reliable and accurate measurement is needed
-
Probe Style Relative Humidity Sensor Module - HM1500LF
HM1500LF is a dedicated humidity transducer designed for OEM applications where a reliable and accurate measurement is needed.
-
Humidity and Temperature Sensor Module - HTG3535CH
HTG3535CH is a dedicated humidity and temperature plug and play transducer designed for OEM applications where a reliable and accurate measurement is needed.
-
Digital Temperature and Humidity Sensor Replace Sensirion SHT21 - HTU21
HTU21D is a digital humidity sensor (RH&T) with I2C format output which can pin to pin replace SHT21.
-
Indoor Air Quality (IAQ) Monitor - TSP-18 Series
TSP-18 Series Indoor Air Quality Monitor, Designed for hotels, houses and other public places to detect the indoor air quality.
-
MF4000 Series Gas Flow Meters - MF4003/MF4008
MF4000 series mass flow meters are designed for applications where manifold flow measurements. The meters can be used for process gas control,samplers..etc
-
Carbon Dioxide Detector CO2 Detector - AR8200
AR8200 Carbon Dioxide detector can detect the Carbon Dioxide content between the 0~5000ppm and shows the Carbon Dioxide volume with an LCD.
-
Remote Particle Counter - P230
The P230 remote particle counter measures 0.3 µm and 0.5 µm with a flow rate of 0.1 CFM (2.83 LPM).
-
Outdoor UV Index Meter - GUVB-S11GS-AG02.1
GUVB-S11GS-AG02.1 is Outdoor UV Index Meter, mainly apply to UV Index indicating in street, beach, swimming pool, park and so on & UV Index alarm.
-
UV Radiometer 2.0 - GUVx-T1xGS2-2LA2
GUVx-T1xGS2-2LA2 UV Radiometer use in Air Environments; Display: Absolute Power; Output of Display: Relay, 4-20mA & RS485 (Option). Apply to UV Curing.
-
AC/DC Operated Carbon Monoxide Alarm (CO Alarm) - VST-C598IH
AC/ DC Operated Carbon Monoxide Alarm (CO Alarm) VST-C598IH. Non-radioactive technology for environmental friendly.
-
SMART Sensor Gas Detector - IMR EX660
IMR EX660 SMART Sensor Gas Detector, easy for replacement and maintenance. Target gas: combustible gas, toxic gas, Oxygen, VOC.
-
Battery Operated Carbon Monoxide Alarm (CO Alarm) - CD11 (CO03B)
CD11 (CO03B) Carbon Monoxide Alarm (CO Alarm), Strong anti-interference ability, Diverse alarm sounds for distinctive CO concentration.
-
Mass Flowmeter for Gases - 41403
Nitrous Oxide Mass Flowmeter 41403 (LCD, 0.01-20L/min N2O, Air, O2, N2 1/4" tube) can be used for a multitude of gas flow measurement applications.